It all starts with excavation the ground and grading. Once these jobs were completed then we moved on gravel spreading and compounding and only after that we started to lay the slabs, each slab is 3×2 feet so two people had to carry ones slab and install it properly so they match the level of each other.
We interlocked all backyard and around the pool, we also built outside kitchen and that required all wiring done before we could start installation, we installed hydro, Gas, and electrical wires.
We also had to install slabs under the deck and around the back entrance..
Stamped Concrete Backyard
Pergola Building
Stamped Concrete Walkway
Fencing
Lawn Sodding
Total Project is 3000sqft
In this project we had to excavate the ground first then we had to form the frame for the concrete, Customer also requested to build pergola in the backyard so we had to install posts before we could pore the concrete. Once all prep jobs were done we pored the concrete and gave concrete the shape of interlock, this is call stamped concrete. Stamped concrete also was done around the house and on the Driveway.
.
Stamped Concrete Driveway
Underneath Heating Installation
Hydro Pipes and Boiler Installation
Total Project is 3000sqft
Customer wanted driveway to be heated driveway so we had to install the hydro pipes and boiler, this was an extensive job since if we do not install hydro pipes well, it could be too late once we pore the concrete. So our professional installers did all right, then we had to pore the concrete and gave a shape of an interlock. So front driveway is hydro heated stamped concrete. Total project was 3000 sqft
Interlocking Backyard Pool
Turf Installation
Cedars Planting
Fencing
Total Project is 600sqft
Project started with backyard excavation and it followed the installation of large 3×2 Unilock slabs around the pool then we install the turf and leveled it to the interlock level. Once all was done, we planted 8 feet high cedars around the pool. It was 600 sqft area.
Interlocking Backyard
sod Installation
Creating Small Flower Beds
Total Project is 650sqft
This backyard did not have any entrance and the only entrance was through the garage, so all materials had to be brought through this door so it was a very extensive work. At the beginning, We excavated the ground and spread the crusher run over the territory and compacted it. Compaction is done with a special com paction machine. After it dried we leveled the high performance bedding and installed the interlock ( I nterlock is called Covington).
For sodding, we brought some 5 tons of top soil and leveled the rest of the backyard with top soil and then we installed the Grass.
We also have created small flower beds and separated the beds with special antico curbs and then we installed some flowers in it.
This porcha had an old flagstone installed long time ago, steps were falling off and sides as well so the owner wanted to demolish old flagstone and replace it with the new Dove Grey Flagstone.
We started with the demolition, so we removed old flagstone and cement, then we provided and installed two inch coping on the steps and around the poarch, after that we installed on the parch one inch square cut Dove gray flagstone and mached the level of Coping stones.
This porcha had an old flagstone installed long time ago, steps were falling off and sides as well so the owner wanted to demolish old flagstone and replace it with the new Dove Grey Flagstone.
We started with the demolition, so we removed old flagstone and cement, then we provided and installed two inch coping on the steps and around the poarch, after that we installed on the parch one inch square cut Dove gray flagstone and mached the level of Coping stones.